Product Quick Find

Search Site


  • Long term rust preventative -highly corrosive areas, salt water, fertiliser works, marine applications.
  • Longterm storage of Concrete beam moulds made of steel
  • Excellent for chassis protection on Trucks and vehicles -assists vehicle inspections - WOF. COF. Cold waterblasting will not remove.
  • Rust preventative on equipment or spare parts being stored for long periods or in direct contact with marine environments.
  • Panel beating undersealing chassis ,inside vehicle panel double skins. Prolan creeps into hard to reach areas.
  • Marine: trailers showing signs of rust, vessell hulls, barges's, anchor warps.
  • Prolan is excellent as a protective coating over a boat trailer once the galvanising has worn and initial signs of rust become visible. It is not recommended to spray Prolan over newly galvanised surfaces. 
  • Environmentally friendly. Biodegradable
  • Non-Carcinogenic
  • Non-Leaching
  • Non-evaporative
  • Non-conductive to 70kv
  • Penetrates into surface rust
  • Penetrates into grooves and joints
  • Resists acids and salts
  • Hermetically seals off surfaces
  • Won't break down rubber and wiring


  • Read Labels prior to use. Shake Well.
  • Prolan is best applied to a clean and dry surface. On existing rust- Prolan can be directly sprayed to seal it from moisture and oxygen. For large areas of flaky rust it is recommended to use a wire brush on the surface to give it an initial clean prior to application of Prolan.
  • For smaller areas use a Prolan trigger sprayer for larger areas the 1.5LP pump-up pressurised sprayer or airboy gun is recommended.
  • After 3-4 days Prolan forms an outer skin - leaving a shiny finish. The longer the time between spraying and use the less dust will form on the outer skin.
  • Protects  longer term than Prolan medium grade but takes longer to dry.
  • Prolan coatings can be removed using the Prolan Degreaser or Hot steam Cleaner this will bring back machinery/ equipment to their original condition.
  • Prolan Enduro Heavy Grade has the following Food Grade approvals: NSF H1,H2,R2   :MPI C12

Product Reviews
Post yours here!

There are currently no reviews for this product.

want more info on this product?

Your Question*
How would you like us to reply*

What's Happening

NEW Prolan Extreme excellent performer
NEW 'Prolan Extreme' has shown excellent results...
Komatsu digger new coating of Prolan Extreme
This Komatsu digger destined for a life on a...
Prolan is now offering a coating service to coat...